Cisco AP – Convert to Autonomous

I’ve done it a couple of times, but I allways forget how it’s done…
Converting a brand new 2702i Access point, do the following.

en
debug capwap console cli
debug capwap cli no-reload
conf t
boot manual
exit
wr
reload

Next boot:

set IP_ADDR 10.0.0.2
set NETMASK 255.255.255.0
DEFAULT_ROUTER 10.0.0.1
tftp_init
tar –xtract tftp://10.0.0.1/ap3g2-k9w7-tar.153-4.JB5.tar flash:

conf t
boot system flash:ap3g2-k9w7-tar.153-4.JB5/ap3g2-k9w7-mx.153-4.JB5

Leave a Comments