Dot1X Kali Linux

I need to remember this for next time I’m faced with a dot1x authentication on wired connection. Add the following to /etc/wpa_supplicant/wpa_supplicant.conf ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=0 network={ key_mgmt=IEEE8021X identity=”your_username” password=”your_super_secret_password” eap=PEAP eapol_flags=0 phase1=”peaplabel=1″ phase2=”auth=MSCHAPV2″ } And then run wpa_supplicant -i eth2 -c /etc/wpa_supplicant/wpa_supplicant.conf -D wired Wait for it to generate a sucess message, and run dhcpclient or […]

Wireshark – export cert

Recently I’ve been working a lot with Wireshark, and in one scenario I had to verify what certificate was used. Exporting the public certificate from a Wireshark it’s pretty easy if you know what to do. First you need to capture the handshake. If you do see the Client/Server Hello messages but no Certification, you […]

raspberry pi , static ip? C’mon

You got to be kidding me. Why on earth are RASPBIAN JESSIE diverting from a common practices on ALL Linux distributions ? Setting a static IP on debian should be done via /etc/network/interfaces why on earth are they making dhcpcd the master of the univers?. a common /etc/network/interface should look like; auto eth0 iface eth0 inet static address […]